Upgrade Kit for Ronin RS3 Pro/RS2, Expansion Base Kit & Glider Pro 3 Duo
- Fast shipping
- Low stock - 4 items left
The Upgrade Kit for Ronin RS3 Pro/RS2, Expansion Base Kit & Glider Pro 3 Duo adapts your existing Glider Pro 3, Ronin RS3 Pro/RS2 and DJI Expansion Base Kit so you can:-
- Operate the control handle on the right side by replacing the existing right handle assembly.
- Utilizes the RS3 Pro/RS2 Expansion Base mount for a smaller overall footprint. This can be expanded by adding the optional base extender for use with the RS3 Pro/RS2 tripod.
- Power the gimbal by moving the battery pack handle to the left side handle with the left power handle mount. Also uses the Lemo cable to route the power back to the Expansion Base.
There's a pin slotted 1/4-20 attachment point for attaching in upright mode as above and on the bass is a 50mm nato rail for attaching the handle in inverted mode (as in below) for that Ronin M form factor.
Below we see the DJI Expansion Base attached to the mount adapter
Here is the mount adapter with two male and female 1/4-20 screws:-
Here is the Left Side Handle Adapter
The power handle attached in the upright position with a 1/4-20 attachment. The inverted attachment uses Arri locator pins and a1/4-20 attachment.
Note: The bottom nato rail attaches with two 1/4-20 screws. Never overtighten these screws as you can damage the threaded insert! The Lemo cable for power delivery needs to be attached via the zip tie around the top arm of the suspension module.
What's in the Box?
- Right side Tethered Remote handle attachment base with
- Arri Pin holed top attachment
- Nato Rail bottom attachment
- M4 X 12 locking screw
- 3/16ths Allen key for Nato Rail - Do not overtighten!
- Mount adapter for DJI Expansion Base -
- includes two 1/4-20 male to female attachment screws
- Left Side Handle Adapter with
- Two 1/4-20 attachment screws - bottom side is has Arri pins
- M4 X 12 locking screw
- 2 cable ties for securing the long bundled length of Lemo cable
- M3 Allen key for securing the locking screws on the attachment bases
Warranty
24 months
